Works very well now
This commit is contained in:
parent
93cd7de90b
commit
e27e31d3c2
95
latch.scad
95
latch.scad
|
|
@ -6,48 +6,79 @@
|
|||
|
||||
$fn = $preview ? 32 : 64;
|
||||
|
||||
module _top_post(thickness, axis, ridge, funnel, tol) {
|
||||
overlap = ridge+tol;
|
||||
dia = 2*thickness+axis;
|
||||
f_diag = (axis+2*funnel)/sqrt(2);
|
||||
// Thickness of walls
|
||||
thickness = 3.0; // [2:5:.5]
|
||||
|
||||
// Diameter of axle
|
||||
axle = 2.5; // [2:5:.5]
|
||||
|
||||
// Clearance above bottom
|
||||
clearance = 3; // [0:10:1]
|
||||
|
||||
// Width of latch
|
||||
width = 10; // [5:50:1]
|
||||
|
||||
// Length of latch
|
||||
length = 20; // [5:100:1]
|
||||
|
||||
/* Other parameters - tune if necessary */
|
||||
// Tolerance of parts
|
||||
tolerance = .2; // [0:1:.1]
|
||||
|
||||
module _top_post(THICK, AXLE, CLEAR, TOL) {
|
||||
dia = 2*THICK+AXLE;
|
||||
center = AXLE/2+CLEAR;
|
||||
f_diag = (2*AXLE)/sqrt(2);
|
||||
difference() {
|
||||
union() {
|
||||
translate([0, -dia/2, 0]) cube([thickness, dia, dia/2+overlap]);
|
||||
translate([thickness, 0, dia/2+overlap]) rotate([0, -90, 0]) cylinder(h=thickness, d=dia);
|
||||
translate([0, -dia/2, 0]) cube([THICK, dia, AXLE/2+CLEAR]);
|
||||
translate([THICK, 0, center]) rotate([0, -90, 0]) cylinder(h=THICK, d=dia);
|
||||
}
|
||||
translate([thickness, 0, dia/2+overlap]) rotate([0, -90, 0]) cylinder(h=thickness, d=axis+tol);
|
||||
translate([0, 0, dia/2-axis/2+overlap]) cube([thickness, dia/2, axis]);
|
||||
translate([0, dia/2, dia/2+overlap+tol]) rotate([-45, 0, 0]) translate([0, -f_diag/2, -f_diag/2]) cube([thickness, f_diag, f_diag]);
|
||||
translate([THICK, 0, center]) rotate([0, -90, 0]) cylinder(h=THICK, d=AXLE+TOL);
|
||||
translate([0, AXLE/2, CLEAR]) rotate([90, 0, 90]) linear_extrude(THICK) polygon([[0, TOL/2], [0, AXLE-TOL/2], [dia/2, 1.5*AXLE], [dia/2, -0.5*AXLE]]);
|
||||
translate([0, 0, CLEAR+TOL]) cube([THICK, AXLE/2, AXLE-2*TOL]);
|
||||
translate([0, -dia, -dia]) cube([THICK, dia, dia]);
|
||||
}
|
||||
}
|
||||
|
||||
module latch_top(spacing=10, thickness=3, axis=2.5, ridge=.7, funnel=.7, tol=.2) {
|
||||
translate([spacing/2, 0, 0]) _top_post(thickness, axis, ridge, funnel, tol);
|
||||
translate([-spacing/2-thickness, 0, 0]) _top_post(thickness, axis, ridge, funnel, tol);
|
||||
module latch_top(WIDTH=width, THICK=thickness, AXLE=axle, CLEAR=clearance, TOL=tolerance) {
|
||||
translate([WIDTH/2+TOL, 0, 0]) _top_post(THICK, AXLE, CLEAR, TOL);
|
||||
translate([-WIDTH/2-THICK-TOL, 0, 0]) _top_post(THICK, AXLE, CLEAR, TOL);
|
||||
}
|
||||
|
||||
module latch_tongue(length=20, width=10, thickness=3, axis=2.5, ridge=.7, tol=.2) {
|
||||
overlap = ridge+thickness;
|
||||
translate([width+thickness, 0, thickness/2]) rotate([0, -90, 0]) cylinder(h=width+2*thickness, d=axis);
|
||||
hull() {
|
||||
translate([width-tol, 0, thickness/2]) rotate([0, -90, 0]) cylinder(h=width-tol, d=thickness);
|
||||
translate([width-tol, length+thickness-.5, .5]) rotate([0, -90, 0]) cylinder(h=width-tol, d=1);
|
||||
translate([0, thickness/2, thickness/2]) cube([width-tol, length+thickness/2, thickness/2]);
|
||||
}
|
||||
translate([0, length, thickness]) cube([width-tol, thickness, overlap+ridge-.5]);
|
||||
hull() {
|
||||
translate([width-tol, length, thickness+overlap+ridge/2]) rotate([0, -90, 0]) cylinder(h=width-tol, d=ridge);
|
||||
translate([width-tol, length+thickness-.5, thickness+overlap+ridge-.5]) rotate([0, -90, 0]) cylinder(h=width-tol, d=1);
|
||||
module latch_tongue(LENGTH=length, WIDTH=width, THICK=thickness, AXLE=axle, TOL=tolerance) {
|
||||
angle = 50;
|
||||
mid = THICK/2;
|
||||
translate([0, 0, THICK]) linear_extrude(WIDTH) {
|
||||
hull() {
|
||||
translate([mid, 0]) circle(d=THICK);
|
||||
translate([AXLE/2+THICK, 0]) circle(d=AXLE);
|
||||
}
|
||||
hull() {
|
||||
translate([mid, 0]) circle(d=THICK);
|
||||
translate([mid, -LENGTH-3*AXLE]) circle(d=THICK);
|
||||
}
|
||||
difference() {
|
||||
translate([AXLE/2+THICK, -LENGTH+AXLE/2]) circle(d=2*THICK+AXLE);
|
||||
translate([AXLE/2+THICK, -LENGTH+AXLE/2]) circle(d=AXLE+TOL);
|
||||
translate([THICK, -LENGTH+AXLE/2]) square([AXLE, THICK]);
|
||||
translate([AXLE/2+THICK, -LENGTH+AXLE/2]) rotate(-angle) translate([-50, 0]) square(100, 100);
|
||||
}
|
||||
translate([AXLE/2+THICK+sin(angle)*(AXLE+THICK)/2, -LENGTH+AXLE/2-cos(angle)*(AXLE+THICK)/2]) circle(d=THICK);
|
||||
}
|
||||
translate([AXLE/2+THICK, 0]) cylinder(h=WIDTH+2*THICK, d=AXLE);
|
||||
}
|
||||
|
||||
module latch_catch(width=10, thickness=3, axis=2.5, ridge=.7, tol=.2) {
|
||||
overlap = ridge;
|
||||
translate([-width/2, 0, 0]) cube([width-tol, thickness, (thickness+ridge)/2+overlap]);
|
||||
translate([width/2-tol, 0, thickness/2+overlap]) rotate([0, -90, 0]) cylinder(h=width-tol, d=ridge);
|
||||
module latch_catch(WIDTH=width, THICK=thickness, AXLE=axle, CLEAR=clearance, TOL=tolerance) {
|
||||
center = AXLE/2+CLEAR;
|
||||
translate([WIDTH/2+THICK+TOL, AXLE/2, center]) rotate([0, -90, 0]) cylinder(h=WIDTH+2*THICK+2*TOL, d=AXLE);
|
||||
translate([WIDTH/2+TOL, 0, 0]) cube([THICK, AXLE, center]);
|
||||
translate([-WIDTH/2-THICK-TOL, 0, 0]) cube([THICK, AXLE, center]);
|
||||
}
|
||||
|
||||
translate([-8, -20, 0]) cube([16, 24.25, 3]);
|
||||
translate([0, 0, 3]) latch_top();
|
||||
translate([20, 0, 0]) mirror([0, 1, 0]) latch_tongue();
|
||||
translate([0, -20, 3]) latch_catch();
|
||||
translate([0, 0, 8.2]) rotate([0, 90, 0]) {
|
||||
translate([-8.2, -20, 0]) cube([16.4, 24.25, 3]);
|
||||
translate([0, 0, 3]) latch_top();
|
||||
translate([0, -20, 3]) latch_catch();
|
||||
}
|
||||
translate([20, 0, 0]) latch_tongue();
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user