This chapter discusses MMA tracks and MIDI channels. If you are reading this manual for the first time you might find some parts confusing. If you do just skip ahead--you can run MMA without knowing many of these details.
To create your accompaniment tracks, MMA divides output into several internal tracks. There are a total of 8 different types of tracks, and an unlimited number of sub-tracks.
When MMA is initialized there are no tracks assigned; however, as your library and song files are processed various tracks will be created. Each track is created a unique name. The track types are discussed later in this chapter, but for now they are BASS, CHORD, WALK, DRUM, ARPEGGIO, SCALE, MELODY, SOLO and ARIA.
All tracks are named by appending a ``-'' and ``name'' to the type-name. This makes it very easy to remember the names, without any complicated rules. So, drum tracks can have names ``Drum-1'', ``Drum-Loud'' or even ``Drum-a-long-name''. The other tracks follow the same rule.
In addition to the hyphenated names described above, you can also name a track using the type-name. So, ``DRUM'' is a valid drum track name. In the supplied library files you'll see that the hyphenated form is usually used to describe patterns.
All track names are case insensitive. This means that the names ``Chord-Sus'', ``CHORD-SUS'' and ``CHORD-sus'' all refer to the same track.
If you want to see the names defined in a song, just run MMA on the file with the ``-c'' command line option.
MIDI defines 16 distinct channels numbered 1 to 16.3.1 There is nothing which says that ``chording'' should be sent to a specific channel, but the drum channel should always be channel 10.3.2
For MMA to produce any output, a MIDI channel must be assigned to a track. During initialization all of the DRUM tracks are assigned to special MIDI channel 10. As musical data is created other MIDI channels are assigned to various tracks as needed.
Channels are assigned from 16 down to 1. This means that the lower numbered channels will most likely not be used, and will be available for other programs or as a ``keyboard track'' on your synth.
In most cases this will work out just fine. However, there are a number of methods you can use to set the channels ``manually.'' You might want to read the sections on CHANNEL (here), CHSHARE (here), ON (here), and OFF (here).
Why bother with all these channels? It would be much easier to put all the information onto one channel, but this would not permit you to set special effects (like MIDIGLIS or MIDIPAN) for a specific track. It would also mean that all your tracks would need to use the same instrumentation.
You might want to come back to this section after reading more of the manual. But, somewhere, the different track types, and why they exist needs to be detailed.
Musical accompaniment comes in a combination of the following:
Of course, this leaves the melody ... but that is up to you, not MMA ...but, if you suspect that some power is missing here, read the brief description of SOLO and MELODY tracks (here) and the complete ``Solo and Melody Tracks'' chapter (here).
MMA comes with several types of tracks, each designed to fill different accompaniment roles. However, it's quite possible to use a track for different roles than originally envisioned. For example, the bass track can be used to generate a single, sustained treble note--or, by enabling HARMONY, multiple notes.
The following sections describe the tracks and give a few suggestions on their uses.
Drums are the first thing one usually thinks about when we hear the word ``accompaniment''. All MMA drum tracks share MIDI channel 10, which is a GM MIDI convention. Drum tracks play single notes determined by the TONE setting for a particular sequence.
If you are familiar with the sound of guitar strumming, then you're familiar with the sound of a chord. MMA chord tracks play a number of notes, all at the same time. The volume of the notes (and the number of notes) and the rhythm is determined by pattern definitions. The instrument used for the chord is determined by the VOICE setting for a sequence.
In musical terms an arpeggio3.3 is the notes of a chord played one at a time. MMA arpeggio tracks take the current chord and, in accordance to the current pattern, play single notes from the chord. The choice of which note to play is mostly decided by MMA . You can help it along with the DIRECTION modifier.
ARPEGGIO tracks are used quite often to highlight rhythms. Using the RSKIP directive produces broken arpeggios.
Using different note length values in patterns helps to make interesting accompaniments.
The playing of scales is a common musical embellishment which addes depth and character to a piece.
When MMA plays a scale, it first determines the current chord. There is an associated scale for each chord which attempts to match the flavor of that chord. The following table sums up the logic used to create the scales:
All scales start on the tonic of the current chord.
If the SCALETYPE is set to CHROMATIC, then a chromatic scale is used. The default for SCALETYPE is AUTO.
MMA plays successive notes of a scale. The timing and length of the notes is determined by the current pattern. Depending on the DIRECTION setting, the notes are played up, down or up and down the scale.
BASS tracks are designed to play single notes for a chord for standard bass patterns. The note to be played, as well as its timing, is determined by the pattern definition. The pattern defines which note from the current chord to play. For example, a standard bass pattern might alternate the playing of the root and fifth notes of a scale or chord. You can also use BASS tracks to play single, sustained treble notes.
The WALK tracks are designed to imitate ``walking bass'' lines. Traditionally, they are played on bass instruments like the upright bass, bass guitar or tuba.
A WALK track uses a pattern to define the note timing and volume. Which note is played is determined from the current chord and a simplistic algorithm. There is no user control over the note selection.
SOLO and MELODY tracks are used for arbitrary note data. Most likely, this is a melody or counter-melody ...but these tracks can also be used to create interesting endings, introductions or transitions.
Real composers don't need to fear much from this feature ...but it can create some interesting effects. ARIA tracks use a predefined pattern to generate melodies over a chord progression. They can be used to actually compose a bit of music or simply to augment a section of an existing piece.
There are a number of ways to silence a track:
![[*]](crossref.png)
) command to stop the
generation of MIDI data,
).
).
).
Please refer to the appropriate sections on this manual for further details.