35 lines
1.1 KiB
Markdown
35 lines
1.1 KiB
Markdown
# Flag Clip (Revised)
|
|
|
|
Hybrid clip / carabiner 3D printable model to attach flags to the cable of a flag pole.
|
|
|
|
The gate of the carabiner does double duty as the lever of the clip.
|
|
|
|
Spring mechanism inspired by [https://www.thingiverse.com/thing:1212828/remixes](https://www.thingiverse.com/thing:1212828/remixes)
|
|
|
|
Since this was intended for outdoors use, I've printed this in PETG.
|
|
|
|
![](img/clip.jpeg)
|
|
|
|
OpenSCAD file enclosed for tuning. In particular, the diameter of the eye at the bottom needs to be closely matched to the flag cable diameter.
|
|
|
|
# Installation
|
|
|
|
![](img/install_1.jpeg)
|
|
![](img/install_2.jpeg)
|
|
![](img/install_3.jpeg)
|
|
![](img/install_4.jpeg)
|
|
![](img/install_5.jpeg)
|
|
|
|
## Revision History
|
|
|
|
### 2022-05-15 Version 1.0
|
|
|
|
Initial Design
|
|
|
|
### 2022-07-04 Version 2.0
|
|
|
|
Substantial Revision. It turns out that even a moderate wind was enough to pull the flag off the pole with the initial design. This revision is considerably more robust to wind, though it still failed in a heavy thunderstorm.
|
|
|
|
### 2023-08-15 Version 4.0
|
|
|
|
Revised again (Rev v3 was unsuccessful). This time tested through an entire season's worth of storms. |